Have an unnecessary tree in the yard that becomes a matter of headache? it is not a coincidence it is a common problem for 60% of Americans. Whether you are a beginner or a professional, having the best crosscut saw will be a big relief in your many daily problems. To sum, these crosscut saws are perfect to cut big trees or large wooden pieces.
They cut smoothly and cleanly in a fast and comfortable way, thanks to the special teeth pattern. However, which one will give you the best experience?
Why this is called crosscut saw?
Have you ever thought why crosscut cut saw is so called? If you look into the teeth of the saw, you will find that they are in a cross position, that means they have ramp angle in both sides.
Mainly they are used to cut wood across the grain i.e. it cuts them perpendicular to the grain seems like in cross position. I hope you now understand why they are called crosscut saw.
Understanding crosscut sawtooth
You know what, the main feature of the Crosscut saw is the tooth pattern. The pattern is like a knife, having an angle in both sides. But the front angle is large than the back angle, as like as a tetrahedron.
The ramp shape in both sides will give you the opportunity to cut by pulling and pushing. These teeth are perfect where you need to cut something big or with big force. These teeth ensure clean and perfect cutting faster than any other saw.
What is a crosscut saw used for?
Crosscut saw are mainly used for cutting a large tree or big pieces of wood. They are used to cut wood across their grain. If you want to cut your wood pieces perpendicular to the grain, then a crosscut saw is a perfect tool for you.
With their thick and large blade with special shape teeth, they can deliver a large amount of force to the blade. So, they easily cut large pieces smoothly in a faster way.
How to recognize best crosscut saw?
You can’t deny that sometimes you got the best product but they don’t provide the best performance, isn’t it? It’s because you have missed some point that you should care about. Here is them of the best crosscut saw.
Is the crosscut saw blade made of stainless steel or titanium?
What is the main part of the saw? Obviously, the blade it is. The blade should be made of good metal like Stainless Steel or titanium that makes it strong, powerful and will keep it free from rust.
Does the handle provides good grip and in good design and shape?
The handle is as important as the blade. It should be its good design and shape as it will fit your hand properly. It should have a good grip and of course strong to receive the force and deliver to the blade.
What Type of crosscut saw you need? two man or one man?
Two-man saw or one man saw which one you will buy is dependent on your work purposes and procedure. If you are going to cut big trees or wood pieces, then it’s better to cut by two persons i.e. go for two persons saw.
Otherwise, if your work is about small pieces or precise cutting, then one man saw would be perfect for you. But for reaching much deep into the workpiece you should go for a fret saw.
Make sure the teeth pattern is uniform
The teeth should be sharp, in good angle and shape. The height of all teeth must be the same and also the shape of all the teeth should be the same to ensure fast and clean cutting.
Crosscut Saw vs Rip saw
Found two kind of saw but in confused in between them? Well, there is just a little basic difference between them. It is about the tooth pattern.
In crosscut saw, you will find that both edges of the teeth have an angle that means ramp in both sides. On the other hand, rip saw has a ramp in only one side.
If you are going to cut a big piece of wood than crosscut saw would be ideal. You can use them by pushing as well as pulling. On the other hand, rip saw cuts only by pushing. So, they are perfect for precise cutting or making any particular shape.
One-man vs two-man crosscut saw
The difference between these two types of saw is as simple as you thought. One man crosscut saw is usable by one man, it has one handle in one side.
The blade is not that much longer but the teeth formation and the sharpness are enough to cut the wood into pieces smoothly. The advantage is they are easy to use, light and needless effort.
On the other hand, the two-man saw is large, have two handles and need to be used by two men. The formation of the teeth is simple and they need to be used by the “pull and Push” method.
Advantage of them is they make the cutting process easier in case of a big scale of work. To cut a tree they will for sure give you an advantage than one man saw.
How to sharpen crosscut saw
Having trouble to cut wood with your saw, it was sharped but not now? Don’t be tensed, you can easily re-sharpen your saw’s teeth with a large file.
First, use a mill file and adjust the height of each teeth. It will ensure that each tooth will work together to cut that will make the cutting process faster.
Then use a triangular file to increase the angle of the teeth that actually increase the sharpness of them. more angle means more sharpness, but be careful don’t increase them too much. That will eventually damage them.
After all, you can use a saw set to adjust the teeth in case they are bent.
Our Recommended Best Crosscut saw
In between thousands of crosscut saws, you will fall in confusion which one will fulfill your expectation. From this point of view, here is our recommended best crosscut saw that will do the job perfectly beyond your satisfaction. Have a look at their review.
Best One Man Crosscut Saw
One man crosscut saw is mainly designed for one person to use to cut wood pieces and other things. They are light and easily usable. You can not cut large tree or bid wood with this, but they are perfect for precise cutting.
Let’s see some of them with the review.
1. Stanley 20-526 15-Inch 12-Point/Inch Sharp Tooth Saw
Let’s start with the product from one of the best manufacturers in this area, Stanley’s crosscut saw is not only a traditional tool with the basic feature but also an amazing one. It has a solid and powerful blade, never waste time by thinking about the durability.
The blade is full of sharp teeth, in perfect pattern and shape. These teeth remain sharp longer than any other tool. However, the teeth are induction hardened teeth, means they are strong powerful and durable.
Now let’s talk about the handle. It is well designed to provide maximum grip while you are working with it. The rubber portion will give you extra comfort for sure, a bit rest for the working hand.
It’s obvious that you are tensed about safety. For sure Stanley is more aware than us, they welded the handle with the blade that means it will never loosen up while you are working with.
Last, I want to mention about the looking of the tool. It has an elegant outlook, a perfect shape with proper safety. In addition, the teeth are so accurate in sharpness and shape that ensures a perfect and clean cutting of the wood.
Let’s mention some cons you may face. There is no head tuner in the blade, I don’t know why Stanley misses that but with this, the tool would be a perfect package for all carpenters no matter what beginner or professional.Check on Amazon
2. IRWIN Tools MARATHON 2011203 24-inch ProTouch Coarse Cut Saw
Our second suggestion on the list is from the famous tool manufacturer Irwin, having the advanced tooth technology you will for sure going to like this one.
The M2 tooth technology ensures the best smooth cutting ever that is a patent pending technology.
This blade and the teeth geometry ensure fast and efficient cutting. It has deep gullets in between the teeth that remove the chips rapidly that also make your cutting faster.
In addition, the 12 point extra fine front teeth on the blade ensure a smooth and fast starting of cutting.
The blade is specially designed for coarse cuts. However, the tapered pitch nose improves the clearance and stability of the saw.
The last thing I want to say is about the blade that is thick and made of good metal. It will provide you rigidity and control to get proper control over the saw.
The problem you may face with this product is like you will face little bit trouble when you will try to cut something in round shape with this one.Check on Amazon
3. Stanley 20-065 26-Inch 12 Points Per Inch ShortCut Saw
Our next suggested product is a traditional one-man crosscut saw that is an ideal tool to cut plastic, pipes, laminate or any wooden type things. Stanley’s saw has a very good shape with a comfortable handle and a sharp blade.
The teeth of the saw are induction hardened that is sharper than any other type teeth and also ensure that you can use them without re-sharping for a long time.
So, without a doubt it cuts faster and smoothly, so save time and improve the level of working.
However, the handle is made of large hardwood, the size and the shape are such that is will fit almost everyone’s hand. The color and the design will attract you for sure.
To sum up, the saw is little and lightweight. For comfortable using it is an ideal tool for all carpenters.
Though it is an amazing tool, it has also some cons like the screws that tighten the blade with the handle may be fell out that may lead to serious danger.Check on Amazon
4. GreatNeck N2610 – 26 Inch 10 TPI Cross Cut Hand Saw – Hardwood Handle
With a high carbon steel blade and hardwood handle, this saw would be a perfect package for you no matter what you are a beginner or a professional. One thing I like about this product is the legacy of simplicity. The looking is just mind-blowing.
Let’s talk about some technical term. The blade is a masterpiece. High carbon steel ensures that it would last longer and the sharpness will be preserved after many times use.
The teeth are sharped and designed in a perfect angle that ensures smooth and clean cutting of wood. You can also re-sharpen to increase the angle in order to improve the sharpness.
The handle is good looking and comfortable. It is weather resistance so you don’t need to think about the durability. In addition. the handle is dark stained it will impress anyone at first sight.
To sum up, the product is just an amazing package to use. But it has also some limitation. It takes a long time to cut compared to other saws that mean if you want a faster tool, then this one is not for you.Check on Amazon
Two Man Crosscut Saw
Not satisfied with the one-man crosscut saw? Then go for the two-man crosscut saw, they need less effort but yeah, teamwork is very important.
1. Lynx 4′ Two Man Crosscut Saw
What do you expect from a two-man crosscut saw? Two large well-designed handles, a good length sharp blade and perfect patterned tooth, right? This Lynx two-man crosscut saw has everything you need.
It’s two large handles are made of beech that ensures not only the proper gripping but also will give you a comfortable experience.
Now let’s come to the important factor, the teeth are in TPI pattern, enough to cut your woods into pieces. In addition, they are sharp and thick to cut smoothly. Each tooth is handset so there remains no confusion about their quality.
The blade is made of thick good steel that ensures that it will preserve its shape and sharpness for a long time.
Looking for something more? Yeah, these teeth can be re-sharpened with a large triangular file. This will increase the angle of the teeth.
Now let’s talk about the bad side, it is large. That means you need more space and care to put it safely. Another point is its weight that might be a problem for you while working.Check on Amazon
Have some question? Hers is your answers
When Should You Use a Crosscut Saw?
A crosscut saw (thwart saw) is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.
What Point Crosscut Saw Would Be Most Effective for Framing Work?
An 8 point is fine for cutting framing lumber, or even 1x’s but doesn’t leave the smoothest cut. A 7 point will do the same thing faster, but leave a slightly rougher cut than the 8 point.
What Is the Difference Between RIP Saw and Crosscut Saw?
With the rip cut, you cut along the grain; while with the cross cut, you cut across the grain. … Cutting across the grain is much harder for the saw (you need to cut a lot of fibers), and you typically use a saw with smaller teeth, but many more of them.
What Are Old Crosscut Saws Worth?
Original condition and original handles along with the manufacturers name are the biggest factors. If the blades are pitted from rust, they may be worth scrap weight while a mint shiny blade, original handles and hardware with a top manufactures name like Simmonds can fetch $75. -$150.
Can You RIP With a Cross Cut Blade?
The Crosscut blade is used when cutting short grain, while the Ripping blade is for long grain. The Combination blade allows one to cut both crosscut and ripping using the same blade.
Which Saw Has the Largest Teeth?
The rip saw has larger teeth and is used for cutting along the grain. Our workshop also includes a compass saw, backsaw, coping saw and for metal work the hacksaw. The cutting teeth of a crosscut saw are alternately bent (set) so that the tooth structure is greater in width than the blade itself.
How Many Teeth per Inch Does a Cross Cut Saw Have?
Each cutting tooth cuts with one edge and pushes the sawdust out with the other. Crosscut saws have 8 to 15 pointed teeth per inch.
What Tasks Should Be Done While Power Saws Are Unplugged?
What tasks should be done while power saws are unplugged? Answer: Change blades, make adjustments. Briefly outline the steps in using a portable circular saw.
Q. Can every saw be re-sharpened?
Ans: Almost every kind of saw can be re-sharpened, so it’s better to check your product before getting it.
Q. How to change the blade of the saw?
Ans: To change the blade of the saw, untighten the screws of the blade from the handle and then replace it with the new blade. Then just tighten up the screws again. That’s it.
Q. Are they safe enough?
Ans: Yes, they are safe as long as you take safety precautions like wearing chaps let, chainsaw chaps, and other safety stuff.
Q. Can I replace any teeth individually?
Ans: No, you can’t do that. If some of them are broken, then you have to replace the whole blade, like Hacksaw.
To sum up, for cutting in large scale the best crosscut saw will be an ideal tool for you. If you want a perfect package with basic feature and amazing performance then why not you are choosing Stanley’s 20-526 crosscut saw.
Or you can choose Irwin’s product for its advanced tooth technology. Want something that looks good with the performance, then Greatneck tool is perfect for you.
Or you can get Stanley’s 20-065 to get an amazing experience in simplicity. After all, if you are thinking about the two-man saw, then go for the lynx product without hesitation.