Imagine you want to make a small hole on your working object but when you try to drill it, it slips away all the time. Maybe you don’t need to imagine that, you have already experienced it. We appreciate that you didn’t lose hope and searching for what you need to get the best working experience.
The answer you looking for is here within the tool named drill press vise. It is a manual tool that you can attach to the drill press machine, and it holds your objects tightly, so you don’t need to worry about drilling in the wrong places. To embrace your workpieces firmly, you need to find the best drill press vise. This article aims to help you find the right vise for you.
Some Best Drill Press Vises up to the present
We have sorted out some best drill press vises that can be found in the market so that you don’t have to do the time-consuming searching as we care for your valuable time. Thus the following section can help you to find the perfect vise that matches most of your desired criteria.
1. Irwin Tools Drill Press Vise
IRWIN producer offers a lightweight drill press vise of only 7 pounds that makes it a portable vise. Just like most other vises, this vise is made of forged iron, making it durable. The 4-inch jaws’ capacity is 4.5 inches, and for secured gripping, the jaws are made textured.
For easy positioning and installation, the base of the product is made slotted. This blue colored drill vise has a clamping pressure of 1000 pounds. The scale or measurement system is in inch, and as it is a manual tool, you don’t need any extra power supply like batteries to operate it. A handle attached to the interior jaw helps you to control the jaw opening.
In the case of prices, this tool is pretty cheap even though it blesses you with perfect light-duty tasks. Total dimensions of this vise are 7 inches in width, 9.4 inches in length and only 2.6 inches in height. as the vise is smaller in size, it is easy to store anywhere and easy to place on the working table.
There is no instruction or warranty provided with this product. And the price is quite higher than other vises that give almost the same result.
2. Wilton Cross Slide Drill Press Vise
Manufacturer Wilton introduces you to a cross slide drill press vise which can move your workpiece not only in the horizontal surface but also in the vertical surface! But the product is not that big, only 7 inches width, 10.5 inches length and 5.8 inches height vise.
The vise is made with fine grain cast iron castings that make it durable. The hardened and grooved jaws can hold round shaped objects too in both X and Y directions. 3 handles or screws are provided in this vise to help you slide the jaws and plate in different directions.
Cast side knob of this cross slide vise can accurately dial in 0.1mm increments. The vise has 5 mounting slots to attach with the drill press firmly. Being only 20 pounds makes it a portable tool and in case of storage or placing on the working table, the vise covers up less area.
Precise information about clamping force and warranty is not provided. There is no instruction given either. Moreover, its price is high comparing the normal horizontal working drill press vises.
3. Shop Fox Cross-Sliding Vise
Just like the previous company, Shop Fox also provides a cross sliding drill press vise. One unique part of this vise is, it has an exclusive slide bar that prevents jaws from tilting up or sideways when tightening. And the adjustable gibs help if there is any slack on top and bottom slides.
Jaw with and capacity are both 4 inches in this vise while both top and bottom slides can travel 4 inches. The jaw opening of the vise is 3.75 inches and overall 5.25 inches height. it is a portable tool as the approximate weight is 22 pounds and it is also easy to store and place for the small-sized body.
Unlike others on the list, this manufacturer provides a 1-year warranty for the product. There is also an instruction video added in the product link to help you to understand how it is supposed to work. The measurement scale in this vise is in inch scale. This durable helps you with both light milling and drilling works at an average price.
Exact information about the tool material is not provided. The jaws are not textured to hold the workpiece properly.
4. Happybuy Drill Press Vise
Unlike the other vises on this list, this vise has a unique swiveling base. The Happybuy manufacturer offers you steel vises with four different jaw openings, 3 inches, 4 inches, 5 inches, and 6 inches jaws. You can buy these vises with or without that swiveling base!
Weight and maximum clamping force vary with the jaw width. In the case of weights, the values range from 10 pounds to 40 pounds, where the weights differ significantly for the base in the same size vises. But the base doesn’t play any role to differ the clamping force for same-sized vises. For 3 inch vise, the max clamp force is 15 kN, and 19 kN, 24 kN, 29 kN are for 4 inches, 5 inches, 6 inches respectively.
The swiveling base comes with perfectly aligned precision jaws, precise 360-degree scale, and acme screws. So, the vise is suitable for milling, drilling and precision parts finishing. This accurate and durable vise is made of high-quality ductile iron of 80k PSI to achieve minimum bending.
No warranty or instruction is provided with the product. And this vise expensive comparing to other vises on the list.
5. HHIP Quick Slide Drill Press Vise
The manufacturer HHIP offers you drill press vises in three different jaw width, 3 inches, 4 inches and 6 inches where their jaw openings are 3.5 inches, 4.75 inches, and 6.25 inches respectively. These iron vises are well built, durable and their weights vary from around 8 pounds to 30 pounds.
Throat depths of these vises are between are 1 to 2 inches and they are made of high-grade strong stress relieved solid iron castings. Two handles or screws are provided with the vise to hold the working object properly and firmly while precision ground helps you to attach the vise to drill press.
Measurement scale in the vise is in inch scale. With the product link, three instruction videos are provided for three different size vises, so you can easily use the product after watching how to use it. As the name says, the vise can slide quickly that makes it comfy to use.
The vise is expensive comparing to other horizontal drill vises and there is no warranty and clamping force info provided with the product either. The jaws of these vises are not etched to hold the workpiece properly.
6. WEN Cast Iron Drill Press Vise
The cheapest portable vise on this list is here, offering you 3 inches wide jaws with 3.1 inches jaw opening and 1-inch throat depth. The vice is only 8 pounds, so you can carry it around anywhere. The product is small in sizes too, the length and widths are within 6 inches and the height is not more than 2 inches.
Like most of the vises, this vise is also made of cast iron that provides stability during operation. Along with the drill press vise, the producer WEN offers you two other types of vises, one of them is bench vise, and another one is tilting vise for various works.
The design of the vise is universal, so it is compatible with the majority of drill presses that can be found on the market. On the base, there are four onboard mounting slots to securely fasten the vise with the drill press. And the textured jaw can firmly grip wood, metal or any working object.
Neither warranty nor any instruction to use the product is not provided. Also, there is no information about the clamping force, but we can tell the force is not that much by its size and weight.
7. Performance Tool Drill Press Vise
The manufacturer Performance Tool provides many types of vises, amongst the list, you can find drill press vises of two different sizes, 2.5 inches, and 4 inches. The weight of the smaller one is less than three pounds and the bigger vise is around 7 pounds.
To prevent slipping, the jaws of the vises are built textured or etched. The dimensions of the vises are really small, so you can easily store them anywhere and they will take less space on the working table. This smaller sized vise is good for working with any wooden workpiece, while the bigger vise can work on wood, plastic, steel or anything.
Jaw opening of these two vises is the same as their jaw width and both have almost the same throat depth, around 1 inch. The base of the product has mounting slots for easy installation on the drill press and it has a precision machined surface for flat shaping.
No warranty, instruction and clamping force information is provided with the product. From other producers, you can find the same sized product at less price that gives almost the same working results. This thin vise can’t be able to give you perfect results.
Journey to Seize the Best Drill Press Vise
Whether you are a total noob or a pro on vises, a proper buying guide can help you to know and revise the specification you need to keep in mind before buying a vise. And the following section is here to help you out with the specs.
Vise jaws are the two parallel iron plates to hold the workpiece properly. They are one of the most important parts of the drill press vises. Because they are the things that hold down the workpiece properly. Before buying the product, you need to know what you should keep in mind about the jaws. Those several factors include the following points:
You can find many types of jaw width, from 3 inches to 6 inches especially. The more the width, the better it is, cause bigger jaws can hold your workpieces properly and can apply more force for clamping.
Jaw opening means the perpendicular distance between two jaws when the jaws are not attached. The opening varies with the jaw width, sometimes the opening length is the same as the width, sometimes not, but the opening length is almost the same, such as if the jaw width is 4 inches, the jaw opening is 3.75 inches in some vises.
The jaw opening is the indicator that tells you about the max size materials that the vise can hold onto. The bigger the opening, the larger the materials it can hold.
Not every vise has textured jaws, some jaws just have plain surfaces. The benefit of the textured jaws is, they can hold your workpiece firmly so that the piece won’t be able to slide as a result of friction between the workpiece and the jaw surface.
There are two types of drill press vises, one is the normal vise that only works and moves your working object on the horizontal axis. The other one is the cross sliding vise, that can work and move your workpiece on both horizontal and vertical axis. And of course, the cross sliding vise is a better choice as you will be able to do more work with it.
The clamping force of the vise is also a major factor. It is the force that is required to hold a part against the locators. The more clamping force a vise can provide, the more accurate your work is going to be, cause more force can hold the working object more precisely without tilting.
There are vises with low clamping force, like only 1000 lb force while there are vises with more force, ranges from 15kN to 29kN force. For your information, the 1000 lb force is compared to 4.4kN force.
You can find mainly two types of bases with press vises. One of them is the normal base, and the other one is the swiveling base. Both of the bases must be solid and have smooth bottom surfaces to be able to attach properly with the drill press. Both of the bases have slots for attaching with nut and bolts.
A swiveling object means that it joins two parts in a way that allows one part to turn without turning the other part. So, unlike the normal vise base, a swiveling vise base lets your vise move 360°. Usually, a precise circular 360° scale is provided with the swiveling base for better work experience and accurate work.
Vise handles or vise screws are provided with the vise to move the parts attached to them. In every vise, there is at least one handle screw attached with the inside jaw to control the opening. In cross slide vise, there are two more screws are given to move the workpiece in the vertical and horizontal directions.
Usually, all the vises are made of solid iron or steel for durability. But sometimes cheap producers use other materials like plastic that make the vise vulnerable. And iron tools tend to have erosion after a while, so they need to be coated with other materials like nickel, otherwise, you are going to waste your money.
The weight of the vise depends on the materials and size. Less weight makes your vise an easily portable item. But the negative side of a lighter vise is that they will not be able to provide more clamping force for better results. But a heavy vise can withstand the operational vibration and pressure more than a lighter vise.
Most of the time the vises come with a fixed body. But in some cases, the tool parts are not attached, so you need to attach them properly. And to attach the vise to the drill press, you need to use nut and bolts through the base slots. Some manufacturer provides the screws but most of the time they don’t.
No tool can bless you with 100% accuracy, but you can choose a tool that can give you more accurate results than others. Accuracy on the vise depends on the fact that if the vise can hold your workpiece properly while working, it gives you more accurate results.
So you can say that the jaw width, jaw texture, materials, and clamping force decide the accuracy of a vise as changes in these factors can change the firm placement of a workpiece inside the jaws.
Instructions are like guidebooks for any tool. You may be able to figure out urself how a simple tool works, but it would be hard to figure out for a complicated tool. Anyone will spoil a machine if he tries to do things on his own, this is why it is important to have any instruction guide with the product.
Some producers provide instruction with the product written in papers, some add videos with the product link about how the product work. But sometimes they don’t provide any instruction at all.
Although most of the companies offer warranty features with their items, some manufacturers don’t provide the service. Do you wanna buy a product with defects? Of course not! So when you buy a product that provides a warranty, you can send the product to the company, they will fix the product or change with a new one.
Q: Can I use a normal bench vise for a drill press?
Ans: You can, but it is the best choice to use a machine vise for any drill operations.
Q: How can I attach a vise to a drill press?
Ans: You can find mounting slots at the base of your vise. You can install it via the mounting holes using bolts through the holes. But if the vise is a large one, its weight is enough to withstand the drilling pressure without installing it to the drill.
Q: Do I need safety to use a drill press vise?
Ans: Of course, you do! You need to wear eye protection when using the machine. You better not forget to check if all the parts are adjusted properly before an operation begins. And never touch your workpiece while the drilling operation is still running.
You shouldn’t have any problem to find the best drill press vise that matches your requirements after reading the product review and buying guide section regardless of being a newbie or a pro. But if you still want advice from us, we are here to help you with this.
First of all, we recommend you to buy the Shop Fox cross-sliding vise. This tool boons you with two working axes for a better result, and holds the workpiece tightly just at an average price! But if you want a vise for light workings, you should buy WEN drill press vise as it is the cheapest vise on the list though it can’t offer you heavy duty.
Lastly, if you are okay with spending more money on precise work experience, you should go for the Happybuy drill press vise since it got a swiveling base with a 360° round scale along with high clamping forces.