Judging from the looks there’s not much to differentiate about these blades. A fine cut more or less depends on the blade itself, obviously, the saw has a significant contributing factor. Kerf, hook angle and many others are the parameters depending on which pros choose their blade for radial arm saw.
There’s a lot more to this than just a finely cut sheet of metal. The contribution that a saw blade provides a piece of wooden appliances is almost always taken for granted. Today’s a different day, you’ll get yourself the best radial arm saw blade that out there.
Best Radial Arm Saw Blade in the Market till Now
Now it’s the time to disclose the list that I have made to facilitate your search. Go through the list as uncover their featured and notice the downfalls. Hopefully, you’ll find the perfect one for you.
1. Concord Blades ACB1400T100HP Non-Ferrous Metal Saw Blade
Concord Blades offers a wide range of various blades and enables you to choose the best fit for your beloved radial arm saw. These blades not only ensures precise cutting but also promise durability.
To begin with, let’s discuss the materials that are used to build this blade. Mainly, this tool features a construction that is fit for cutting the non-ferrous items. That’s why you will find less amount of iron in the body of the blade. Yeah, as said before, for this construction the blade is good at cutting plastic, plexiglass, fiberglass, PVC, acrylic, etc.
The manufacturer claims to use a sturdy and hard titanium carbide on the blade. This means you get superb performance and durability. Thus you get more efficiency and also can ensure longer life of your favorite radial arm saw. However, you can use it for other types of saw also.
The blade is equipped with TCG (Triple Chip Grind). That’s the reason why you get better chip flow and experience low drag. This feature also ensures long term use and gives a fine cut to the end. Moreover, the blade has a 3.4 mm kerf design. This ensures further fine cut and obviously destroys less wood. A 5-degree hook is added for further safety.
Some users have complained that this blade tends to get slightly imbalanced. Besides, some have said that it loses its edges comparatively fast.
2. Freud 10″ x 60T Miter Saw Blade (LU91R010)
With lots of its extra-ordinary features, this blade by Freud can be your choice. It features an improved design and better ergonomics. That’s why it fits with any saw and can render better performance for a long time. Okay, now let’s disclose its features one by one!
Obviously, you can find different types of blades for serving different purposes. The range starts from 8-1/2 inch and up to 1-inch. You get 48, 60 and 72 teeth variant. A thin kerf variant is also available. As you get plenty of choices, you can surely choose the best fit for your saw.
This blade has ATB (Alternate Top Bevel) Grind. That’s why you remove chips easily and also experience a little or no tear-out. Besides, this type of blade has a sharper edge and ensures a fine cut. Besides, less amount of wood is wasted due to this mechanism.
What about the performance? Simply, don’t worry! The manufacturer has equipped the blade with a crosscutting blend that has premium high-density carbide. These features enable the blade to render better cutting experience. Besides, durability is also increased.
Did you ever notice any accidental climb of the blade during the cutting? This actually happens due to the hook angle. That’s why the Negative hook angle prevents risks and also increases control over the operation. Besides, thin kerf requires less power and runs efficiently.
Blade drag is reduced effectively by Perma-Shield Coating which is also Non-Sticky. This coating ensures the service life of this blade by providing protection against rust. Besides, this coating ensures less pitch-up during the operation.
The blade gradually loses its sharp edge and some users have noticed this change after a relatively short period.
3. Oshlun SBW-100060N ATB Saw Blade
If you have to deal with different types of wood pieces but still need precise cutting, this blade can meet your needs. With its extra-ordinary features, this radial arm saw blade can ensure proper cutting. But all of these features come at an astonishingly low price.
Slim kerf is introduced to ensure a proper cut. This will help you if you are hankering after fine cutting. As the blade has thin kerf, it’ll waste less wood to give you a proper cut for your required cut. Besides, the chance of breaking during the operation is also mitigated.
Of course, like any other blades, you can have different options for different purposes. The most common form of the blade is a variant having teeth. You can use it for general purposes. But if you want accurate cutting you can go with 24, 50, 80 teeth variant with lots of precise options. Additional options offer you ripping tooth, chip guard and fine finishing. Besides, a negative sliding miter option is also available.
Are you looking for safety precautions of the blade? Okay, here’s it! For safety, a negative hook angle is ensured. From the above discussion you know the function of a negative hook angle, right? So, you need not worry about accidental jumping or bumping of the workpiece. What a relief!
C-4 Carbide is used in the blade and the top-notch material has made it fit for professional-grade. This means you can do heavy-duty woodworking without tension. Durability is also ensured for this built material. Another brilliant feature of the tool is it has an anti-vibration mechanism. It has slots that will encounter vibration and thus give you smooth cutting.
You need to be careful while you are using this tool as some users have faced overheating issues during the applications.
4. IRWIN Classic Series, Carbide Table (15070)
Your search for a blade in your budget ends here! This blade can offer you some extra-ordinary features at a comparatively low price. The most spectacular feature is seen when it comes down to the teeth. The manufacturer did a really good job by installing a set of teeth that are precisely accurate in size ‘n shape. That’s why you get a smooth cut along with accuracy.
Durability is ensured by the hardened plate. The blade can prove itself under any tough circumstances by its sturdy teeth. That’s why you can cut through hard materials. Besides, the enriched carbon steel made high-gauge is installed to ensure further durability.
A world-class Arbor is installed in the blade. The size of the part is 5/8-inch, perfect for cutting purposes. For this design excellence, you can have better ergonomics that results in a perfect cut. You can have a smooth top-notch finishing by this blade as it has a 24 teeth configuration. Now trimming ‘n finishing jobs are an easy shot!
Some of the users opine that the cutting performance it provides is something average. If you want premium cutting, you may increase your budget.
5. CMT 219.080.10 Industrial Sliding Compound Miter & Radial Saw Blade
This is a blade from a trusted manufacturer who has plenty of experience in this field. With all of the features the blade offers, it can serve your cutting ‘n finishing purpose with ease. Let’s see what’s the secret lies under the hood that has made the blade one of the top players?
You can find different blades by the same manufacturer and that’s why the same quality is ensured. Besides, you can find the perfect one for your radial arm saw from the list provided by the manufacturer. They offer you blades of different sizes and strengths. That’s why if you own two or more radial arm saws, you can easily ensure the same quality blades for different types.
A negative hook angle is ensured to reduce the chance of any accidental climbing. Besides, this mitigates the chance of wobbling and even can provide better ergonomics. You can cut soft, hard or ply any types of wood along with laminates. That’s why you can get more opportunities to deal with different workpieces.
You are free from the tension of durability. This blade has micro-grain carbide teeth to provide you effective cutting for many years. Besides, this feature ensures smooth cut and maximize ergonomics. The chance of overheating is reduced by PTFE coating over the blade. This coating also prevents rust and pitch buildup.
You may face some difficulties while dealing with hardwood. Besides, you can sharpen the blade once effectively.
The Route to Best Radial ARM Saw Blade
With all the experiences I gathered in these years of woodworking, I can now understand some important terms that are related to saw blades. Gosh, if I had somebody to explain to me those techy terms properly! But when it comes down to you, I can confidently assure you that you’re in right place. Anyways, herby I’ve described some important features that must be checked if you’re really in search of the best radial arm saw blade.
Okay, if you’re an expert, definitely I don’t need to explain it elaborately. Actually, this term denotes how deep the blade will cut. In other words, it describes the thickness of any cut. Sometimes, it also refers to the thickness of the blade.
But which factors do you need to watch out? Firstly, you need to deeply understand the importance of the kerf of the blade. Let’s say you need a fine cut that has the regulation of maintaining a desired and critical tolerance level. Even a .098 inch can matter, then you need to carefully choose the kerf of the blade. Otherwise, you may end up cutting bigger or smaller cuts.
As you know the blade determines its kerf. Here, a term is very crucial. The ‘set’ of the teeth. Actually, this is determined by the angle which is away from the vertical and by which those teeth are attached with the blade. These may be of different types. But each type has its own defined applications.
Thicker or Thinner?
Blades that feature crude construction are specified for framing works. Generally, it has heavy carbide teeth which are welded with the disc. If you need quick cutting and have no problem with rough cutting, you can have these types of blades.
But when it comes down to fine woodworking, you should not make the fat boys as your choice. All you need is thinner blades but with more teeth. These thinner blades will increase the frequency of cutting but don’t waste much wood.
Another thing you should make sure that your blade doesn’t wobble during the operation. For that, you should switch to heavier blades. That’s how you can ensure no accidental jumping occurs while you’re dealing with sophisticated workpieces.
Choosing the right kerf brings us down to the task of choosing the right blade with an accurate hook angle. Hook angle’s the amount of lean (forward or backward) each tooth has. In other words, a hook angle is a specific angle at which the tip of any blade enters.
Here come two separate terms: positive ‘n negative hook angle. Suppose, you encounter a blade that has a 20-degree positive hook angle, what’ll you understand? It’s simple! In this case, the blade will enter into any material at a 20-degree angle. The teeth are arranged in such a way that they create a positive angle with the vertical.
In most cases, 5 to 15-degree hook angles are considered as standard ones where the stripper ones can range up to 18 to 22 degrees. Softer metals can be easily cut or ripped using these types. But usually, hard metals require a swallow 6 degree. Positive hook angle will cut more aggressively than the negative ones and so there’ll always be a chance of wobbling of the blade or even an accidental jumping off the blade.
Hopefully, now you understand where a positive hook angle is recommended. But what about the negative hook angle. Yeah, you got it right! A negative hook angle is required where you want a gentle cut. In most of the case, -5-degree hook angle is used to reduce the risk. That’s why the change of self-feeding of materials is mitigated. Besides, overall control over the tool is also ensured.
Number of Teeth
For the tooth, there’s a simple rule. The more the teeth, the finer the cut! If you deal with cuts that require precisions and extra care, you should go with blades that have simply more teeth. Another aspect of such blades is, they tend to cut slowly. Of course, for this reason, it can’t be utilized where you need rough and fast cuts. But for this, you can have better control over your tool.
Materials to be Cut
It’s obvious that you need to consider why you’re buying this blade. If you cut heavy materials on a daily basis and if those materials don’t need precise cutting, you can go with blades that have a positive hook angle.
Besides, blades with less number of teeth can be a good option for a bulkier cut. Nevertheless, as you can guess from the earlier discussion, you need blades that have more teeth and of course, a negative hook angle can be a good option for precise cutting.
Saw tip Configuration
The term ‘grind’ stands for referring to the overall shape of the saw tip. The arrangement can be of different types. You can extract some extra benefits from the blades if you know their saw tip arrangements. Let’s have a quick overview!
1. Flat Top Grind
As the name suggests, these blades have a flat ‘n square top. Why is this configuration important? Simply because you can use these blades for general purpose. This grind also ensures durability.
2. Alternate Top Bevel (ATB)
Okay, what’s the specs? You can notice that the top of alternating teeth are beveled. It can be 15 degrees approx. This combination rewards you from giving sharper edges. You can, that’s why enjoy the better cut quality and of course without chipping or splinters.
3. ATB with Raker (ATBR)
Another arrangement for cutting with much precision and for adding safety.
4. Alternate Top Bevel with Alternate Face Bevels (ATAF)
An added benefit with the first one is available with this type! You can grind the face and can do it with an angle. That’s why you can have a sharper cutting along with a more pointed edge.
The term ‘combination tooth’ stands for an arrangement of teeth that is obtained by placing a number of one kind of teeth and then another type. A better example can be an arrangement of 4 ATB then 1 raker. Here the raker tooth is inserted to ensure that the V-shaped piece of material which is left in the center is removed. That’s why you can have a smoother cut. Besides, the raker helps the blade to run straight.
As you know, the blades tend to heat up during operations. That’s why manufacturers try to introduce materials that can resist the heat up. The best way to decide the right material of the blade is to learn about the carbide used to build the blade. You can find whether professional-grade carbide is used or not in the blade from the specs provided by the manufacturers.
Q: How can I maintain the sharpness of the blade?
Ans: You need to ensure that your radial arm saw blade is properly cleaned after every use. Besides, try best not to expose the blade in salty water because by doing so you’re making the blade vulnerable to catch rust.
Q: How can I prevent accidental jumping off the blade?
Ans: If all other conditions are matched, try to pick up a blade that has a negative hook angle. These teeth will provide a gentle cut but will reduce the risk of accidental jumping.
Q: Can I claim a refund if I don’t like the blade I’ve selected earlier?
Ans: Actually, it depends on the manufacturer of the blade. But in most cases, you can.
We’ve tried so hard to present to you some of the best radial arms saw blade currently available in the market. Hopefully, you can decide the best fit for your radial arm saw taking the essence from the enriched buying guide. But some of you may still in a dilemma. Okay, let us step in!
Now I’m citing some of the products that personally attracted me. These two products are specialized in two different fields. If you are looking for heavy-duty cutting, you can go with Freud 10″ x 60T Miter Saw Blade (LU91R010). But if you need fine cutting, you can check out Oshlun SBW-100060N ATB Saw Blade as it gives you numerous options.