If you are going to hold pieces of magnetic materials in position for tack welding, then you are searching the right thing. Yes, you need welding magnets. But knowing only this is not enough, is it? If you are unable to find the best welding magnets, it won’t be able hold thin pieces of metal together at different angles. So, you won’t be allowed too solder them together. Of course, you will never want that to happen. So, let’s find out the best option for you.
What are Welding Magnets
Welding magnets are the pieces of magnets that are predominantly used to hold pieces of magnetic materials in position where a series of small welds are used to align pieces of metals securely before completing with a final weld.
They can also help you to weld together things such as steel gates, metal stair steps even your bicycle frames. Do you know what is the best part of them? You can hold tight your welding workpieces at your desired angles like 30, 45, 90 or else.
You can also use them to hold thin pieces of metals together at different angles to allow them to be soldered together. They will also support your steel structures whilst marking across pieces of metal in order to create a template.
So, if you don’t choose the right one, you can’t do your desired work properly. This article will provide you a brief description of each of the welding magnets so that it becomes easy for you to put the right one to your cart.
Our recommended Best Welding Magnets
You won’t be able to see the physical products, so you must rely on the experiences of other buyers. If you are able to get the experience of other buyers, you will be able to compare them and take a suitable decision. Moreover, you should know if the product really provides you the service that you are seeking. We exactly do this. So, by reading our review, you can compare the products with each other and then make your decision.
1. Strong Hand Tools MSA46-HD Adjust-O Magnet Square
If you want to hold metal workpieces at 45° and 90° then strong hand tools MSA46-HD Adjust-O Magnet square will help you. It has the feature of on/Off switches.
The features that will make it worthy your money are:
The magnet is really strong. It can help you to hold a six feet pipe with no problem! So, it is fulfilling its first condition of holding the metal workpieces, the one for which you use it.
It has the feature of on and off switches which is really beneficial for you. You can choose to turn the magnetism off, midway or on. This ability will allow you to do smaller tacks and prevents the magnet from collecting every metal shaving on earth.
This magnet is fully enclosed so it is easy to clean. You just need to turn off the switch and blow some air and your cleaning task will be done.
You can use either side of the magnets.
Durability is another good feature of this magnet. As it is made with strong rare earth material it is durable. Again, though the magnet has on/off switched, it does not use any battery. So, you don’t need to be worried to change it.
Some people think that the magnet should be stronger and the switch doesn’t work always. It does not come with multiple holding strengths which you may consider as a downfall.
2. ABN Arrow Welding Magnets
ABN Arrow Welding magnet is a metal working tool which is capable of making 45, 90- and 135-degree angles.
This magnet will give you the perfect angle. Each welding angle magnet is designed with an arrow shape to allow you to work with different angles while welding, soldering or installing metalwork. Each magnet welding holder provides you the angle of 45, 90 and 135 degrees.
The magnet is strong enough to hold your metal projects together and allow you hands-free welding. This magnet sticks solidly to any ferrous metal object and the bright red color will help you locate it easily.
It is constructed of high stainless steel with a powder coated finish. So, this magnet is durable, long lasting, and resistant to rust and corrosion.
The magnet is easy to hold. The center hole of the magnet allows you to grab the magnet easily.
This magnet doesn’t have any notable con. Bot the magnet could be stronger. Another thing is you should not weld closely to magnets.
3. 4 Pieces of CMS Magnetics Magnet Welding Holder
It is a 4 pieces Magnetics Magnetic Welding Holder.
It is ideal for fast setup and stable, accurate holding for all welding jobs. It will hold your materials at 90, 45 and 135 degrees.
It has red powder coating which will protect it rusting and from scratching materials, you may be working with.
Its holding strength is good enough for light-duty or schoolwork. It probably won’t hold 25 lbs. but is able to hold 16lbs or so.
It is not suitable for all kinds of welding. It melts on first use for some kind of welding.
4. Magswitch Mini Multi Angle
You can use it as a grounding mechanism when you have a small part to weld and the pieces don’t touch the welding table.
The magnet has on/off switched. You can use it to pick up all kinds of metal shavings, grinding dust, etc. and then just by switching the magnet off, it will all fall off. So, you will get a clean magnet ready to use again with the twist of a wrist.
It will allow you 45, 60, 90- and 120-degree angles for small pieces that accommodate flat or pipe, allowing for precise placement.
The magnet is not nearly as strong as advertised. You will need two of them to work better.
It doesn’t have any bolt for the ground wire.
5. 6PC Welding Magnet Arrow Type
You can use this magnet primarily for welding, but it has other applications too. You can clean kitchen exhaust hoods and these will help you to keep your tarps connected to the hoods on type II hoods very well.
The set of magnetic welding arrows are really good. They are rugged and square. They are impressive and good quality at a very reasonable price.
It will free up your hands so you can concentrate on your work.
The product is advertised as :2-75lb magnets, 2-50lb magnets and 2- 25lb magnets. But it is not as strong as advertised. Some customer claim that it can’t even support their own weight when stored vertical on welding table.
It doesn’t have any off/ on switch. They are just magnets.
Best Welding Magnets Buying Guide: Understanding the Features to Find out the Best Welding Magnets
You must be thinking which type of welding magnet should you choose?
Well, if you are using a welding magnet for creating standard steel shapes, then the best welding magnet to have would be a fixed multi angle.
If you need to use it for extensive use of irregular angles, you should use variable angle welding magnets.
Strength of the magnet
The first thing you need to consider is how strong the magnet is. Whether the magnet is strong enough to hold your metal projects together and allow you hands free welding or they will stick solidly to any ferrous metal object.
Number of angles
You use welding magnets to hold thin pieces of metals together at different angles to allow them to be soldered together. So, the second thing you need to care about is the angle. Check out the number of angles the welding magnet provides. The more the quantity, the better the usefulness.
On/ off switch
You should consider whether the magnet does have on/off switch. This feature will help you to choose to turn the magnetism off, midway or on. This will also help you to clean the magnet. You don’t have to fight with the magnet and workpiece after completion of welding to pull it down if you have on/off switch. Just turn off the switch and you are done.
Setting up a ground connection on your workpiece/project is obligatory you know. Fortunately, some of the welding magnets offer grounding facilities besides its magnetism which is great.
You should be careful about the durability of the magnet.
Frequently Asked Question
Q: Can welding magnets be used for ground connection?
Ans: Some welding magnet like Magwitch Mini Multi-angle magnet can be used for the ground connection.
Q: Do the magnets having on/off switch use any battery?
Ans: No, the magnets having on/off switch don’t use any battery.
Welding magnets help to hold tight workpieces from different angles while soldering. You should get one because you will eventually run out of hands. These magnets will help you, big time to keep things in place. It will even enable you to create a 90-degree angle, which comes handy at times when using a MIG welding pliers along with. So, choose the best welding magnet for you.
If you want to buy a welding magnet having on/off switch, then Strong Hand Tools MSA46-HD Adjust-O Magnet Square or Magswitch Mini Multi Angle should be your choice.
You should choose Strong Hand Tools MSA46-HD Adjust-O Magnet Square or ABN Arrow Welding Magnets if you want a durable, long lasting magnet.
No magnet is strong enough as it is advertised. So, read the pros and cons of this article to make sure that you are buying your desired one.
Hopefully, you will be benefitted from reading this article. I wish you to buy the magnet which will be worthy of both your need and money.