The hammer is among those tools that have a variety of roles besides doing carpentry and simple construction.
Hammers consist of three parts, a weighted head, a handle made from wood or rubber and the back. They are used to create an impact on a small area.
Hammers are used mainly to drive nails into wood or steel, to shapen metal sheets or solid metals and also for crushing rocks and bricks.
Some hammers are highly specialized for the tasks traditionally held by axes. Besides, the rest of the hammers are versatile and are used in any workshop.
There are different types of hammers according to size, shape, uses, and materials. Here are some hammers for your betterment to choose from for your work.
Different Types of Hammers
It’s the hammer having rounded peen and mostly used by engineers. The handles are made of wood, especially ash or hickory.
Mostly used for shaping metals and closing rivets ends. Also used for rounding edges of fasteners and for “Peening“, a fabrication method.
Cross and Straight Pein
These hammers are mainly used for shaping metals. The pain can be at right angles to the handle or parallel with it.
The cross pein can be used for starting panel pins and tacks. Also used for light joinery and cabinet works. Handles are made of wood, usually Ash.
It’s the most recognized hammer for general works. Have wooden, glass-fibred or steel handles.
The back of the claw is curved, a forked claw of “V” shape to draw out nails. Used to lever up floorboards or where other places where a lever is required.
It’s a versatile hammer for different types of works and a common member of every workshop.
This hammer is also known as a lump or drilling hammer. The double-faced head is good for light demolition works.
It’s also used for driving steel chisels and masonry nails. The handles are made of wood, synthetic resin or hickory.
It’s not well-suited for commercial works rather best suited to domestic work.
This double-head metal hammer has a long handle similar to a mallet. The handle may be made of wood or non-slip rubber coating.
It’s used for heavier jobs like breaking up concrete, stone or masonry, driving in stakes. Also used for lighter jobs blowing the head of the hammer.
But for heavier work, the hammer is swung like an axe. It’s used for commercial works as well as household works.
Dead Blow Hammer
For minimal recoil and soft blows, this hammerhead is designed specially. The head is either made of solid rubber or plastic or sometimes semi-hollow filled with sand or lead shot.
From woodworking to automotive applications, these hammers can be used everywhere. They aid in dislodging parts, fixing small dents and knocking wood together or apart without marring the surface.
These hammers are found in every workshop as well as in woodworking projects.
These hammers provide heavy heads, longer handles, and milled faces in order to drive large nails quickly into dimensional lumber.
It has straight claw to carry out heavy-duty ripping jobs and also for removing nails. To prevent slippage while driving nails, the heads are made waffled.
This hammer is mainly used for house framing as it’s found in carpenter’s tool bag.
This hammer has two long, claw-like heads, one of which has a magnetized face and is used for holding and driving tacks.
It’s a lightweight hammer that is often referred to as an upholstery hammer. The non-magnetized end is used for driving the placed.
This is the most common type of mallets for simple works. It has a rubber head that allows softer blows to any irregular surface and also increases the service life of the conformable anti-slip tape.
The wooden handle reduces vibration during the stroke and increases comfort. It’s used on sheet metal, in woodworking and upholstery.
It’s also gentle enough to force plasterboard into place without damaging it. These hammers are preferable for simple woodworking projects.
This hammer is known as a rock climbing hammer. It has straight pein containing a hole for removing pitons.
Anvil style head is whether heavy or lighter with a hollow handle that depends upon the type of rock climbing intended.
To drive more pitons quickly with less fatigue, heavier models are used whereas the lighter models are used when driving fewer pitons to reduce weight loads.
Some of these hammers have interchangeable heads for a wider range of climbing methods.
The blacksmith’s hammer is a type of sledgehammer where the second head is slightly tapered and rounded.
These hammers are designed specifically for forging white-hot steel against an anvil to make different tools.
The brick hammer’s claw doubles as a chisel for scoring, on the other hand, the narrow head is used for splitting bricks.
This design makes the hammer useful in bricklaying and masonry projects. Also used for making brick chips for concreting purposes.
This hammer also referred to as a masonry hammer.
Straight peen hammers are specially designed for drywall works named as drywall hammer. It has a specialized end that closely resembles a hatchet with a notch in the bottom.
It’s important holding nails in place without damaging the drywall paper and the notch does so. In order to chop off excess bits of drywall safely the blade of the pein can be used.
The engineer’s hammer features a rounded head and cross peen and a handle made of either wood or rubber.
This hammer was traditionally used for locomotive repair and also for shaping metals.
This hammer also commonly referred to heavier ball peen hammers and hammers which have a rounded double head.
These hammers feature a flat, square head on one side and cylindrical head on the other side. These are commonly used by blacksmiths for metal works and for making tools.
It’s used for shaping metal on a block or anvil.
This type of hammers features a thin, cylindrical double-head used for pounding steel pins without damaging the surrounding surface.
Both automotive and woodworking shops, these hammers are used.
The hatchet hammer is one of the more unusual types of hammer used. These hammers sometimes referred to as a half-hatchet that have axe blade instead of a peen.
This hammer can be used for tasks of various types. For this, it is well-suited for survival and emergency toolkits.
The head of this traditional mallet is made of a solid, slightly tapered wood block instead of metal.
It can be used for driving chisels or gently tapping wood joints together without marring the surface.
This electrician’s hammer is a variation of a claw hammer. It has an extended neck on the head.
This extended part allows electricians to target nails embedded in hard to reach places.
This hammer features a flat head and a long pein tipped with a conical die. It sometimes referred to as a body mechanic’s hammer.
It is used with a curved type of anvil in order to remove dents in car panels.
Hammers are widely used for carpentry works, blacksmith’s works, metal works and so on. Different types of hammers have different applications.
It’s important to use the hammer according to work for a perfect result. There are different companies in the market for the manufacture of hammers.
Before buying any, check it’s compatibility, durability and also the price. It will help you to carry out your work easily.